Please use the table below to ascertain how much product you will need for your boat, dependent on its size. If you boat size falls between two sizes, please order the bigger of the two sizes.
|Up to 30ft single deck||1 complete boat kit|
|Up to 30ft flybridge||1 kit and 1 extra 110ml glaze|
|Up to 40ft single deck||1 kit and 1 extra 110ml glaze|
|Up to 40ft flybridge||1 kit, 1 x 500ml prep and 2 extra 110ml glaze|
|Up to 45ft single deck||1 kit and 2 extra 110ml glaze|
|Up to 45ft flybridge||1 kit, 1 x 500ml prep, 3 x 110ml glaze|
|Up to 50ft single deck||1 kit, 1 x 500ml prep, 3 x 110ml glaze|
|Up to 50ft flybridge||1 kit, 1 x 500ml prep, 4 x 110ml glaze|
|Up to 60ft single deck||1 kit, 1 x 500ml prep, 4 x 110ml glaze|
|Up to 60ft flybridge||1 kit, 2 x 500ml prep, 5 x 110ml glaze|
|Up to 70ft single deck||1 kit, 2 x 500ml prep, 6 x 110ml glaze|
|Up to 70ft Flybridge||1 kit, 2 x 500ml prep, 8 x 110ml glaze|
|Vessels above this size||Please call 01795 592640 for quantity requirements|
Please note: Before applying an Aglaze sealant, please ensure that any compound that has been applied previously does not contain a wax finish. We also suggest that you order up to 25% more sealant than required as it is porous and may require additional coats to ensure an even finish.
Be aware that the type of glaze needed will vary depending on whether your boat is GRP or has been painted. If your boat is both GRP and painted, you will require the painted version glaze.
For sailing yachts refer to single deck craft.
We recommend you use an extra wash n shine shampoo to ensure the finish is maintained throughout the season – please see our special offers page.
If your boat has any damaged gelcoats that need to be cut back and restored, you may need extra glaze. We suggest using Pre-cut first to restore the gelcoat that has been UV damaged.
If you are looking to coat a superyacht, you will need to know the square meterage, but we recommend that one litre of superyacht glaze will coat 180 square metres of painted surface.
If you require any further guidance, please call the AGlaze team on 0030-6972070137 or email: firstname.lastname@example.org